MCEBuddy klipper shows ned til de første 10 minutter. Jeg startede først med MKV-profilen. Skiftede derefter til TS. Slukkede comskip.
Uanset hvad, klipper den shows efter 10 minutter.
Hjælp mig venligst med at finde ud af det.
Tak.
DishNation-S08E244-28533462-0.ts-Dish Nation-2020-08-15T13-30-45.log (646.9 KB)
TMZLive-S08E245-28541240-0.ts-TMZ-2020-08-15T13-57-42.log (664.6 KB)
Dine optagelser er beskadigede. Dette sker normalt på grund af et dårligt kildesignal eller en defekt/fejlbehæftet TV-tuner/optagedriver. Hvis du for nylig har opdateret en driver eller firmware, bør du overveje at rulle den tilbage.
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpeg2video @ 000002dfcc926540] Invalid frame dimensions 0x0.
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Last message repeated 1 times
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Stream #1: not enough frames to estimate rate; consider increasing probesize
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Stream #6: not enough frames to estimate rate; consider increasing probesize
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Stream #7: not enough frames to estimate rate; consider increasing probesize
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Stream #9: not enough frames to estimate rate; consider increasing probesize
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Stream #13: not enough frames to estimate rate; consider increasing probesize
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 0 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 1 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 5 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 6 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 7 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 8 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 9 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 10 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 11 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 12 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] start time for stream 13 is not set in estimate_timings_from_pts
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] PES packet size mismatch
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 0 (Audio: ac3 ([129][0][0][0] / 0x0081), 0 channels, fltp): unspecified sample rate
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 1 (Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv)): unspecified size
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 5 (Audio: ac3 ([129][0][0][0] / 0x0081), 0 channels): unspecified sample format
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 6 (Video: mpeg2video ([2][0][0][0] / 0x0002), none): unspecified size
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 7 (Video: mpeg2video ([2][0][0][0] / 0x0002), none): unspecified size
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 8 (Audio: ac3 ([129][0][0][0] / 0x0081), 0 channels): unspecified sample format
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 9 (Video: mpeg2video ([2][0][0][0] / 0x0002), none): unspecified size
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 10 (Audio: ac3 ([129][0][0][0] / 0x0081), 0 channels): unspecified sample format
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 11 (Audio: ac3 ([129][0][0][0] / 0x0081), 0 channels): unspecified sample format
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 12 (Audio: ac3 ([129][0][0][0] / 0x0081), 0 channels): unspecified sample format
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → Consider increasing the value for the ‘analyzeduration’ and ‘probesize’ options
2020-08-15T13:31:29 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] Could not find codec parameters for stream 13 (Video: mpeg2video ([2][0][0][0] / 0x0002), none): unspecified size
2020-08-15T13:31:45 MCEBuddy.AppWrapper.FFmpeg → [mpegts @ 000002dfcc8b9200] PES packet size mismatch
Tak for dit svar.
Så begge mine Ceton-kort er ved at gå i stykker?
Eller er det signalet fra Comcast, der forårsager dette?
Tak for chaufførforslaget.
Ceton eksisterer ikke længere, og den seneste firmware/drivere, de offentliggjorde, bruger jeg nu. Er der en anden løsning, jeg kan bruge til at løse dette? Lige nu skal jeg genbehandle halvdelen af mine udsendelser med redigeringssoftware.
Er der en profil eller indstilling i MCEBuddy, jeg kan justere eller slukke for??
Tak
Du kan altid redigere profilerne og tilpasse dem til dine behov. Ffmpeg kan ikke komme forbi remuxing på grund af video-fejl. Du kan prøve følgende:
Skip remuxing. Se om dette hjælper, da det vil springe remuxing over (hvilket kan medføre tab af funktionalitet afhængigt af din videofil, f.eks. hvis videofilen er h.265, virker den muligvis ikke med ShowAnalyzer osv.).Tak for forslagene.
For at beholde TS eller MKV ubehandlet på visse udsendelser (som sport), virker Skip Remuxing.
På andre udsendelser, der er “én og færdig”, ændrede jeg profilen til MKV Normal Quality, da handbrake allerede var først.
Jeg leger stadig med indstillingerne, men nu kan jeg i det mindste se en hel udsendelse.
Opdatering: Efter at have skiftet kabler, ringet til Comcast for at sende signaler til kabelkort, skiftet harddiske osv. fandt jeg ud af, at en af portene på mit RAID-controllerkort var ved at gå i stykker og til sidst døde.
Jeg udskiftede det med et nyt, og nu fungerer MCEBuddy uden fejl.
Tak for din hjælp.