Je viens de passer de la version 2.6.5 à 2.6.6 et j’ai perdu tous mes paramètres. Il s’agit des emplacements surveillés et des tâches. Existe-t-il un moyen de les récupérer ? Les deux provenaient du service Premium. J’ai arrêté les conversions, arrêté le service et lancé l’installateur. Maintenant, c’est comme s’il s’agissait d’une toute nouvelle installation avec seulement les paramètres par défaut.
It sounds like your MCEBuddy settings, including monitored locations and tasks, were lost after upgrading from version 2.6.5 to 2.6.6. That’s definitely frustrating, especially after using the premium service.
Let’s see if we can find a way to recover them. Usually, MCEBuddy stores its settings in a specific location. It’s possible the upgrade created a new configuration, or perhaps the old one is still present but not being loaded.
I’ll search the forum for similar issues and potential solutions regarding lost settings or profiles after an upgrade.
I’m sorry to hear you’ve lost your settings after the upgrade. It sounds like a frustrating experience.
This topic, Profiles missing after upgrade, seems to be the most relevant to your issue.
It appears there might be a few other users who have experienced similar issues with settings or profiles vanishing after an upgrade, such as in Conversion Tasks Vanish and Previouse Insatll Config.
While I can’t directly help you recover your settings, typically, MCEBuddy stores its configuration files in a specific location on your computer. It’s possible the upgrade created a new configuration or didn’t properly migrate the old one.
You might want to check the MCEBuddy documentation or search the forum for information on the location of configuration files (mcebuddy.conf or similar) to see if you can locate a backup or previous version. Sometimes, reinstalling without uninstalling first can lead to this if the installer doesn’t properly detect the old configuration.
Since you mentioned you had the Premium service, you could also check if there’s any cloud backup or sync feature that might have preserved your settings, or if there’s a specific support channel for Premium users.
La même chose m’est arrivée : j’ai perdu mon profil personnalisé HEVC MKV NVIDIA. Il apparaît dans le journal mcebuddy mais pas dans le profile.config.
Ça ne fonctionne toujours pas, j’ai complètement désinstallé MCEBuddy. J’ai fait une désinstallation totale via Windows. J’ai effectué une recherche système et je ne trouve aucune référence à MCEBuddy… J’aimerais recommencer, mais je ne sais pas par où commencer ce processus. Je ne suis pas très doué en informatique… J’ai le zip de ma dernière version et de la nouvelle. Les deux sont des versions Premium…
I understand that you’re having trouble with your profiles after upgrading, and now you’ve completely uninstalled MCEBuddy and are looking for a fresh start. It can be frustrating when settings go missing and you’re not sure where to begin.
Since you’ve already uninstalled MCEBuddy, the best course of action would be to perform a clean installation. This typically involves:
- Downloading the latest version: Make sure you have the correct installer for your Premium service.
- Running the installer: Follow the on-screen prompts to install MCEBuddy.
- Re-configuring your settings: Unfortunately, since your profiles were lost, you’ll likely need to re-create your monitored locations, tasks, and custom profiles from scratch.
I recommend checking the official MCEBuddy documentation for detailed installation instructions. If you’re still facing issues after a clean install, or if you’re unsure about any step, it would be helpful to provide more details about:
- The exact version of Windows you are using.
- Any error messages you might be encountering during or after installation.
This will help in troubleshooting the problem more effectively.
Win 11, lors de l’ouverture de MCEBuddy, le premier message d’erreur vient de Norton… qui vérifie MCEBuddy.Gui comme fichier suspect ; après validation, l’écran titre de MCEBuddy apparaît. Il ne parvient pas à se connecter au service, donc je ne peux pas voir les fichiers de paramètres de MCEBuddy. J’ai essayé avec ma version précédente et la version actuelle.
It sounds like Norton is interfering with MCEBuddy’s ability to connect to its service. This is a common issue where antivirus software can flag legitimate programs.
To resolve this, you’ll likely need to add MCEBuddy to Norton’s exceptions or whitelist. This tells Norton to trust MCEBuddy and not block its operations.
Here’s a general approach you can take (the exact steps might vary slightly depending on your Norton version):
- Open Norton Security.
- Look for settings related to “Exclusions,” “Allowed Programs,” or “Firewall.” You might find this under “Settings” or “Advanced.”
- Add MCEBuddy’s executable files to the exclusion list. The main ones you’ll want to add are
MCEBuddy.exeandMCEBuddy.GUI.exe. These are typically found in the MCEBuddy installation directory (e.g.,C:\Program Files\MCEBuddy_2_6_6). You might need to browse to this location. - Restart MCEBuddy after making these changes. You may even need to restart your computer to ensure the changes take effect.
If you’re unsure how to do this in Norton, I recommend searching for “How to add exclusions to Norton 360” (or whatever Norton version you have) online. Norton’s support documentation should provide detailed steps.
Once Norton is no longer blocking MCEBuddy, you should be able to connect to the service and access your settings.
Le Forum_Helper_bot m’a donné un indice. Je suis allé dans C:\Program Files\MCEBuddy2x\config et j’ai trouvé un profile.conf.old et mcebuddy.conf.old. J’ai arrêté le processus, arrêté le service, et j’ai fait une copie de sauvegarde de l’ancien et du nouveau. J’ai ensuite supprimé les nouveaux fichiers .conf, supprimé le .old des sauvegardes, redémarré le service et l’application et voilà, tout est de retour. J’espère que cela vous donnera à plus d’entre vous un endroit où regarder et une solution possible. À l’avenir, je prévois de faire une sauvegarde de ces fichiers.
Tout est de nouveau opérationnel. J’ai procédé à un nettoyage complet du système pour tout ce qui concerne MCEBuddy. Il semblait y avoir un fichier corrompu quelque part qui causait le problème. J’ai redémarré, effectué une installation propre de la version actuelle. Maintenant, cela fonctionne. Merci à tous ceux qui ont fourni des contributions et des commentaires, ils ont tous été utiles.
Pour référence future, MCEBackup sauvegarde toujours les fichiers de configuration en 2 endroits. Plus de détails ici
Pour mémoire… j’ai aussi perdu ma configuration lors de la dernière mise à jour. Je pense que c’est peut-être fréquent.
Dans C:\Program Files\MCEBuddy2x\config, j’ai renommé les fichiers *.conf en *.conf.new et les *.conf.old en *.conf.
J’ai aussi ajouté C:\Program Files\MCEBuddy2x\config à mes sauvegardes nocturnes (duplicati si ça vous intéresse), car c’est déjà arrivé !
Robert
Oui, pareil ici. arrêt du service, récupération des fichiers, redémarrage du service de sauvegarde..
J’ai créé une publication plus tôt aujourd’hui concernant la spécification d’emplacements alternatifs pour le fichier profiles.conf – avant de trouver ce fil de discussion,
Peut-être que cette option pourrait être rendue accessible pour préserver les fichiers mcebuddy.conf hautement personnalisés des utilisateurs ?