# Manual edit commerical feature is great but we need more accurate control **URL:** https://discussion.mcebuddy2x.com/t/manual-edit-commerical-feature-is-great-but-we-need-more-accurate-control/4024 **Category:** New Features **Created:** [November 29, 2020, 5:43pm UTC](https://discussion.mcebuddy2x.com/t/manual-edit-commerical-feature-is-great-but-we-need-more-accurate-control/4024 "2020-11-29T17:43:06Z") **Posts on this page:** 1 **Showing post:** 3
### Author: ![Goose](https://discussion.mcebuddy2x.com/letter_avatar_proxy/v4/letter/g/5f9b8f/32.png) [@Goose](https://discussion.mcebuddy2x.com/u/Goose) #### Post date: [December 1, 2020, 12:38am UTC](https://discussion.mcebuddy2x.com/t/manual-edit-commerical-feature-is-great-but-we-need-more-accurate-control/4024/3 "2020-12-01T00:38:05Z")
There already are levels of granular control available. > [@Custom Cuts Suggestions - speed up sliders using keys](https://discussion.mcebuddy2x.com/t/feature-custom-cuts-suggestions-speed-up-sliders-using-keys/3207/): > > Request Type: NEW FEATURE Summary of the problem or suggestion: I am using Custom Cuts and it works very well. Thank you for making this! There are a few recommendations I would like to present for consideration: It would be very valuable and helpful to have a “jump qualifier” to jump x-seconds while holding down a control/shift. Ideally, holding down CTRL would jump 30 seconds while pressing left/right, and holding down SHIFT would jump 10 seconds. Even more ideally still these could b… As for increasing the accuracy, that’s a limitation of the source video. A video frame can only cut cleanly along an I frame otherwise it causes tearing of the video. How often I frames are present in the video GOP depends on the video encoding characteristics of the original recording and the format it uses. Basically if you’re working with MP4 files where you can cut depends on the original video encoding and not the accuracy of custom cuts. --- _[View the full topic](https://discussion.mcebuddy2x.com/t/manual-edit-commerical-feature-is-great-but-we-need-more-accurate-control/4024)._