# Conversion/monitor on MCE Buddy launch **URL:** https://discussion.mcebuddy2x.com/t/conversion-monitor-on-mce-buddy-launch/3514 **Category:** General Support / Questions **Created:** [March 29, 2020, 12:54am UTC](https://discussion.mcebuddy2x.com/t/conversion-monitor-on-mce-buddy-launch/3514 "2020-03-29T00:54:43Z") **Posts on this page:** 1 **Showing post:** 3
### Author: ![Goose](https://discussion.mcebuddy2x.com/letter_avatar_proxy/v4/letter/g/5f9b8f/32.png) [@Goose](https://discussion.mcebuddy2x.com/u/Goose) #### Post date: [March 30, 2020, 1:34pm UTC](https://discussion.mcebuddy2x.com/t/conversion-monitor-on-mce-buddy-launch/3514/3 "2020-03-30T13:34:41Z")
In addition to what @Will_Tschumy said, see this page also for start up parameters: > [@MCEBuddy - Advanced Settings, Commands and Tweaking](https://discussion.mcebuddy2x.com/t/mcebuddy-advanced-settings-commands-and-tweaking/30#startupoptions): > > Advanced concepts to use MCEBuddy Refer to the [MCEBuddy Profiles Basics](https://discussion.mcebuddy2x.com/t/27) page to learn about basic Profiles creation NOTE: Advanced Conversion Parameters apply to profiles.conf Do NOT edit mcebuddy.conf. As of v2.3.13 ALL Advanced Configuration Parameters (except FFmpegBackupRemux) in mcebuddy.conf can be accessed through the GUI, Settings → Expert Settings page DO NOT REPLACE THE NEW CONFIGURATION FILES WITH THE OLD FILES AS PARAMETERS IN THE NEW FILES ARE ADDED/UPDATED WITH EACH RELEASE. … --- _[View the full topic](https://discussion.mcebuddy2x.com/t/conversion-monitor-on-mce-buddy-launch/3514)._